Pistorius 12" Pneumatic Downfeed Cut-off Saw, Model ESC, Refurbished 2024, 1.5HP, 3PH Pistorius ...

ATech Crater-06 AP, Automatic 20" Aluminum / Plastics Upcut Saw 5.5HP, 220/440V, 3Ph 20" blade ...

Whirlwind 1000L or R, 5HP, 3PH, Rebuilt 2024, 2 x 6 Capacity 14" Blade Cap. Picture is of used m...

Refurbished 216L available, price reflects mechanical refurbishment* and repainting. Double palm...

Whirlwind 212L or 212R Refurbished Upcut Saw, 4" x 10" stock capacity, 18" blade, 10HP, 3PH Motor...

Pistorius LHSC12P, Pneumatic Cut Off Saw, 3HP, 3PH, Rebuilt 2024 Pistorius Machine Co Model: LH...

The Cantek PCM508 20” Miter Cut-Off Saw is a precision pneumatic saw designed for cutting miters ...

CANTEK | PCS18 18″ PNEUMATIC CHOP SAW (RH or LH) Speed up your crosscutting operations. The Can...

Cantek's newest addition to their chopsaw line-up. For cutting aluminum and other non-ferrous mat...

Good used Pistorius MN-200 Infeed and outfeed tables included, power lock stop (2) 1.5HP motors...

Pistorius MN-200, Rebuilt 2024, (2) 1.5HP motors, 480V, 3PH, Premium Bearing / Belt / Idler Set-u...

Pistorius MN-200, Rebuilt 2024, (2) 1.5HP motors, 480V, 3PH Core machine in to rebuild, allow 8 ...

Pistorius Rebuilt MN-300, 14" Blade Cap. Double Miter Saw, 3PH Rebuilt and set to your desired 3...

Omga Optimizing / Defecting Crosscut Saw, T 2030 NC, 2006, 480V, 3PH Prior model the same or sim...

Tannewitz Model U Table Saw, 5HP, 3PH, Cleaned, Checked Cleaned and checked, video made 5HP 240...

Pat Mooney Saws PMI-CNC 18 MDS Automatic Upcut Sawing Center, 7.5HP, 4.3 x 11.8 Sawing Cap, Pushf...

Adjustable maximum 45 degree to the right or left or 90 degree angle setting for semi-automatic, ...

Semi-automatic, fast cutting. Auto. cutting cycle simply operated by foot switch. Sealed long-l...

Semi-automatic, fast cutting. Auto. cutting cycle simply operated by foot switch. Sealed long-l...

Feed Rolls & Pressure Rolls Bottom Rolls – 7 pieces in Front Section & 5 pieces in Rear Section ...

Available in Right Hand & Left Hand configuration Cut off capacity (thickness x width): 2″ x 21″...

Available in Right Hand & Left Hand configuration Cut off capacity (thickness x width): 1”x10”, ...

Peerless Electric Hacksaw, 10 x 10 Cutting Capacity, 230V, 3PH, Refurbished Cleaned, checked, el...

Frommia 660, Double Miter saw for Zero Tolerance Wood Frame Joints, 1987, 480V 3PH Cleaned, chec...

NEW Zero clearance flush cuts As an undercut saw, safer and easier to control than traditional u...

Needs to be rebuilt 5HP 230V 3PH 2" arbor 1/2" machined 1-1/2" threaded 1-1/8" diameter

Rockwell / Delta 16 Inch Radial Arm Saw, 16-RAS, 1974, 5HP, 230V, 3PH, Cleaned, Checked, 18" Cros...

American Saw Mill Machinery Co. / Monarch Unipoint Radial Arm Saw, 3PH Cleaned and Checked, vide...

Silver SCF-100SR Slat Making Saw, 2003, Multiple blades, 28.5HP, 575V With USA Voltage Transforme...

Altendorf F45 Sliding Table, 2000, Tilting Arbor Panel Saw, 10Ft Cap., 3PH Currently being repai...

Altendorf F90, 1987, Cleaned, Checked, Table Bearings Replaced, 10.5ft Capacity, 208/230V 3PH Al...

SCMI Sliding Table Saw - Model SI 15F Will be cleaned, checked, in good running condition This ...

Delta Contractor Saw, Fence, Tube rails, 1.5HP motor. Needs Repair. Needs Repair or use parts o...

Sawstop ICS51230, 10" Industrial Table Saw, 36" Fence and Rails, 5HP, Single Phase, 230V The Saw...

Cleaned and checked 5HP, 230/460V, 3Ph Includes Excalibur overhead dust collection

Pistorius Rebuilt MN-201, 12" Blade Cap. Double Miter Saw, 3PH Rebuilt machine About 90% plus d...

Pistorius MN-302S, 14" Toe Kick / Notching Saw, Reconditioned, 3PH 14" Blade Capacity Rail machi...