Lobo 25" 3HD Planer / Sander, Planer, Drum, Combo Heads, 230V, 3PH

Lobo 25" 3HD Planer / Sander, Planer, Drum, Combo Heads, 230V, 3PH  

Just in to be cleaned and checked.

• This machine is especially designed for planing and sanding of harder to process materials such as glue panel, bend board, rough lumber.

• The first station is a knife planer head, followed with a drum, then a combination drum & platen head at the third station.

• The spiral planer cutterhead is fitted with 14 x 14 MM, four edge throw away Tungsten Carbide knife inserts, providing superior chip removal rate, minimum noise, and extremely smooth cutting effect.

• Changing knife inserts are conveniently done without removing the cutterhead. The spiral cutterhead is precision machined from special aluminum alloy steel by CNC machine center, tempered and precision ground.

• Anti-kickback fingers, mounted at the infeed of the machine, this anti-kickback finger gives a safety guard for the operator.

• Insufficient pressure protection, in case insufficient working air pressure occurs, the machine brakes automatically to prevent unsafe operation.

• Irreversible running of pressure roller, runs a single direction only, giving an additional safety guard for panel kickback.

• Automatic elevation of conveyor table (micro-computer controlled with digital readout), it accurately displays the position of the conveyor table and automatically moves to the setting thickness for planning, sanding.

• Panel cleaning brush roller; built at outfeed end of the machine, this cleaning brush roller cleans the powder on the sanded panel.

• Hold-down platen is hard chrome treated for maximum wear resistance.

25" x 75" Belt capacity on the two sanding heads.