Tigerstop logo

TigerStop is an automated material stop gauge and positioner. It can push, pull, and position material, and will turn your existing machine into a lean manufacturing asset. TigerStop can push up to120 lbs. using roller tables, and quickly positions to your desired length and cuts within +/- .004" (.1mm) every time.

Parts and accessories for TigerSaw, TigerFence, TigerCrossCut, and other products are available.

Call for information or to order - 920-452-4494

TigerStop Spare Parts

If you don't see what you need, give us a call! We carry new and used parts.

Rebuilt TigerStop Motors in Stock!

Why pay over $2,500 for a new motor, when we have rebuilt motors for $1,200. Call 920-452-4494 to order.

Idle End Sensors
$145.00
TigerStop Idle End Sensor
Idle end sensors, also known as the far end sensor

Part #
IES2-04
IES2-06
IES2-10
IES2-12
IES2-16
IES2-20
IES2-22
IES2-24
IES2-30

Working Length:
4'
6'
10'
12'
16'
20'
22'
24'
30'

Overall Length:
6'
8'
12'
14'
18'
22'
24'
26'
32'

Tiger Turbo Belts
TigerTurbo BeltThe TigerTurbo has two belts: a small drive belt and a much larger belt that moves the positioner. This is the large belt.

Part #:
AT5-TT-012
AT5-TT-015
AT5-TT-018
AT5-TT-021
AT5-TT-024
AT5-TT-027
AT5-TT-030
AT5-TT-036
AT5-TT-042

Working Length:
12'
15'
18'
21'
24'
27'
30'
36'
42'

Overall Length
15'
18'
21'
24'
27'
30'
33'
39'
45'

Price:
$1,185
$1,530
$1,705
$1,905
$2,090
$2,280
$2,455
$2,840
$3,275

TigerStop Belts

TigerStop Belt

TigerStop's proprietary belt allows your machine to run accurately day in and day out. Belts are 32mm wide and not compatible with older machines using a narrower belt. This item ships with a Belt Clamp Alignment Tool (B0700).

Part # Working Length Overall Length Price
ATB3 3' 5' $345
ATB4 4' 6' $420
ATB6 6' 8' $535
ATB8 8' 10' $660
ATB12 12' 14' $935
ATB14 14' 16' $1,145
ATB16 16' 18' $1,200
ATB20 20' 22' $1,515
ATB22 22' 24' $1,670
ATB24 24' 26' $1,815
ATB30 30' 32' $2,195

Printer Labels
TS Printer LabelsLabels are compatible with 2" and 4" direct thermal label printers from Zebra

Part #:
PR2-LBL
PR4-LBL

Label Dimensions
2.25" x 1.25"
4" x 2.5"

# Labels
2100
1000

Price:
$85
$145

Amplifier & Accessories

Part # Description Price

TigerStop AmplifierAmplifier

AMP6 The amplifier is the circuit board driving the motor in most TigerStop positioners. Compatible with TigerSTop, TigerFence (and TigerFence StraightLineRip), TigerCrossCut, TigerTurbo, TigerRack, and HeavyDuty2. Includes a refundable $200.00 core charge for return of old unit. Requires a Controller (CON5) and is not compatible with older controllers. Test motor before ordering. Machine serial # required when ordering. $2,070

Amplifier to I/O Panel CableAmplifier to I/O Panel Cable

SA7690 This is the Amplifier to I/O Panel Cable Assembly $100

TS Motor Encoder CableMotor Encoder Cable

ENCC-B Connects motors to the Amplifier (AMP6) in a TigerStop, TigerFence, or TigerCrossCut. This cable is not compatible with other motor types. $65

TigerStop EncoderEncoder

ENC Rotary encoder works with TigerStop, TigerFence, and TigerCrossCut. The cable connecting the encoder to the amplifier is included. $470
Tigerstop Ethernet Serial Converter ESC Ethernet to serial converter $345

Back Fence
Tigerstop Back Fence

The Back Fence mounts onto the table and comes in 6' sections. It is often paired with a Back Fence Ruler and used during the Backboard Optimization Process. This item includes the necessary mounting hardware.
*Note: The Back Fence does not come with TigerStop tables. These must be purchased separately.
Part #: BF
Price: $145

Back Fence Rulers
TigerStop Ruler

Back Fence Ruler Metric

Tape measure with an adhesive backing, frequently mounted to the back fence. Available in Left-to-Right, Right-to-Left, and metric.

Part # Description Price
BRLR Right-to-Left, 12' long, displays measurements in inches, increasing to the right $80
BRLRM Right-to-Left, 4 meters long, displays measurements in cm, increasing to the right $80
BRRL Left-to-Right, 12' long, displays measurements in inches, increasing to the left $80
BRRLM Left-to-Right, 4 meters long, displays measurements in cm, increasing to the left $80

Bar Scanner - Wired
TS Bar Code Scanner

Barcode scanners can be used with TigerStop, TIgerFence (and SLR), TigerCrossCut, TigerTurbo, TigerRack, and HeavyDuty2. Requires SET feature, and an I/O panel when the TigerStop is connected to a computer. The wired barcode scanner includes a RS232 cable as well as a power supply and cable.
For a complete barcode scanner kit including an I/O panel and SET software, refer to part number BCS-KIT.
Part #: BCS
Price: $1,115

Belt Clamp
TS Belt Clamp

The belt clamp can be used with the belt clamp alignment tool for all TigerStops with 32mm belting.
Part #: ATC32
Price: $65

Belt Clamp Alignment Tool
TS Belt Clamp Alignment Tool

The Belt Clamp Alignment Tool is used to keep the TigerStop belt in alignment during replacement. Note: This tool is sold separately from the Belt Clamp (ATC32).
Part #: B0700
Price: $16

Center Pusher
TigerStop Center Pusher

The center pusher is an attachment for the TigerStop, used for pushing material on center. The push bar adds about 23" of reach beyond the leading edge of the flip away. Can be adjusted up to 6" away from the TigerStop beam. The pushing surface is .75" x 1.7".
Part #: CP
Price: $1,035

Controller Cables/Covers
TigerStop Controller Cable
TS covers

Connects a Controller (CON5) to an Amplifier (AMP6), 15-pin

Part # Description Price
CC5-10 10 ft. long $105
CC5-20 20 ft. long $115
CC5-30 30 ft. long $125
CC5-40 40 ft. long $135
CC5-50 50 ft. long $145
DB9CVR Dust covers for cable plugs $6

Controller Parts

TigerStop Controller Cover
TigerStop Controller Stand
TigerStop Controller Stand Hardware

Part # Description Price
SMTCVR Controller cover for Version 4 controller - clear plastic, protects controller from metal and wood dust, and lubricants. $95
SMTCS Controller Stand - includes mounting hardware and is used for both the standard Controller and the Tablet Package. Compatible with TigerStop, TigerFence, TigerCrussCut, TigerRack, TigerTurbo, and HeavyDuty2. $230
CSHP Controller Stand Hardware Pack - hardware needed for the controller stand. Compatible with TigerStop, TigerFence, TigerCrussCut, TigerRack, TigerTurbo, and HeavyDuty2 $30

Dust Seal Strip
TS Dust Seal Strip

Dustseal strip keeps dust and debris out of the TigerStop beam. Ordered in a single strip in 1' increments. Every TigerStop has two dust seal strips the full length of the beam.

Part #: DS
Price: $2/ft.

Flip Away
TigerStop Flip Away

The Flip Away is the external portion of the TigerStop carriage. It provides two T-slots for mounting various pushing attachments, and a hinged mount to allow the pusher to be lifted out of the way. The modern flip away is compatible with TigerStops built in 1999 or later (i.e. with the hinge mount behind the beam).

Part #: STOP2
Price: $435

Miter Gauges/Pusher Feet

Part # Description Price
Tigerstop Miter Gauge MGX Extended Miter Gauge - a TigerStop attachment intended for applications requiring a 45 degree surface, slopes away from the cutting tool. Adjusts to provide 1.5 - 4.5" of sloped surface. Extended miter gauge can adjust from 15.5 - 34" beyond the leading edge of the flip away. $695
TigerStop Extended Pusher Foot PFX Extended Pusher Foot - flat pushing attachment for TigerStop. Surface is 3.9" x .6". Reach can be adjusted from 16.5" - 35.5" beyond the leading edge of the flip away. $695
TigerStop Gangstop Pusher Foot GSX Gangstop Pusher Foot - flat pushing attachment for TigerStop. Surface is 10" x 3". Reach can be adjusted from 6" - 25" beyond the leading edge of the flip away. $695
HeavyDuty2 Gangstop GSX-TT/HD2 HeavyDuty 2 Gangstop - flat pusher attachment for the TigerSturbo or the HeavyDuty 2. Surface is 12" x 4". The attachments reach is 20" beyond the leading edge of the carriage it is attached to. GSX-TT/HD2 orders must specify a left-handed or right-handed orientation. Left-handed means the positioner is to the left of the integrated tool. $1,040

Idle End Cap
Idle End Cap

Plate that covers the end of the TigerStop extrusion that is far from the motor.

Part #: EC2
Price: $135

Idle End Carriage
Idle End Carriage

End Carriage/Far End Carriage is for TigerStops using a 32mm width belt. Contains the idle pulley, the pulley housing, and the tensioning bolt.

Part #: IEC2
Price: $270

Idle End Pulley
Idle End Pulley

The idle end pulley is for TigerStops using a 32mm width belt. Compatible with the Idle End Carriage (IEC2).

Part #: IEP
Price: $115

Interconnect Plug (6-Pin)
Interconnect Plug

This plug is used to connect a six-conductor cable with the six-pin I/O port on the amplifier. Soldering tools and ability will be required.

Part #: IKP
Price: $50

Interconnect Plug (8-Pin)
Interconnect Plug

This plug is used to connect an eight-conductor cable with the eight-pin I/O port on the amplifier. Soldering tools and ability will be required.

Part #: IKP8
Price: $50

Internal Carriage
TigerStop Internal Carriage

Connects the TigerStop belt inside the beam to the flip away outside of the beam. Ships assembled with Linear Polymer Guides (LPG> and includes the belt clamp (ATC32).

Part #: ISC
Price: $530

Keypad Membranes

TigerStop Keypad Membrane V5 CON5KPM This keypad membrane is compatible with Version 5 controller (CON5) and cannot be used with older electronics. Price: $200
TigerStop V4 Keypad Membrane SMTKPM This keypad membrane is for controller versions 3.0 - 4.7, and is incompatible with the Version 5 controller (CON5). Membrane dimensions are 9.25" x 5.0". Price: $300

Label Printer
TigerStop Label Printer

This is a replacement direct thermal printer for systems already enabled for printing. The data cable and a roll of 4" x 2.5" labels are included. Consumable printer ribbons are not required for direct thermal printing.

Part #: PRINTER-4
Price: $1,599

Limit Switch for Standard Interconnect Kit
TigerStop Limit Switch

The roller switch is used in the Standard Interconnect Kit. It is also used as an end-sensor for the TigerFence, TigerCrossCut, TigerRack, TigerTurbo, and HeavyDuty 2.

Part #: IKLS
Price: $50

Locking Handle
TigerStop Locking Handle

Locking handle includes handle, bolt, and washer, used on various pusher foot accessories. Note: Locking handles sold separately. If you would like to order a locking handle set as pictured, you will need to order two locking handles.

Part #: LH
Price: $20

Mini Gangstop
TigerStop Mini Gangstop

Locking handle includes handle, bolt, and washer, used on various pusher foot accessories. Note: Locking handles sold separately. If you would like to order a locking handle set as pictured, you will need to order two locking handles.

Part #: MGS
Price: $335

Miter Gauge
TigerStop MiterGauge

A TigerStop attachment intended for applications requiring a 45 degree surface, sloped away from the cutting tool. The adjustable miter retention clip prevents parts from sliding up the sloped surface as the positioner moves. The clip can be adjusted to provide from 1.5" - 4.5" of sloped surface. The miter gauge reach can be adjusted from 2.5" - 9.0" beyond the leading edge of the flip away.

Part #: MG
Price: $585

Motor Box Cover
TigerStop Motor Box Cover

Replacement aluminum cover for the Amplifier (AMP6).

Part #: MBC2
Price: $125

Motor Box Cover End Cap & Gasket
Motor Box End Cap & Gasket

Replacement end cap for the Amplifier (AMP6).

Part #: MBEC2
Price: $65

Motor End Pulley
TS Motor End Pulley

Pulley is compatible with TigerStops using a 32mm width belt. It ships with a roll pin.

Part #: ATP
Price: $65

Motor End Sensor
TS Motor End Sensor

Signals the limit of travel near the motor. It is compatible with TigerStops of any length.

Part #: MES2
Price: $115

Motor Kit
TS Motor

TigerStop replacement motor kit includes:

  • Motor Mount
  • Motor End Pulley
  • Encoder
  • Belt Clamp Alignment Tool

Part #: MOT2
Price: $2,340

Motor Plate Bearing
TS Motor Plate Bearing

Bearing for the TigerStop motor mount

Part #: MPB
Price: $30

Plastic Roller Replacement
TS Roller Replacement

Replacement plastic roller for 14" wide plastic roller tables.

Part #: CR
Price: $85

Polymer Linear Guides
TS Polymer Linear Guides

TigerStop's polymer linear guides will keep your machine fast and accurate. Hardware for attachment and adjustment is included.

Part #:PLG
Price: $30

Power Switch
TS Power Switch

Replacement power switch for the amplifier.

Part #:SW2
Price: $40

Printer Cable
TS Printer Cable

Replacement printer data cable. Connects a label printer (or the breakout box on an inkjet printing system) to the I/O panel.

Part #:PRCSMT
Price: $105

Saw Attachment Plate
Saw Attachment Plate

The saw attachment plate provides more flexibility when mounting TigerStop feed tables to various tools. It is universal for left and right table components.

Part #:SAP
Price: $150

Saw Blades

BLADE 450mm Fine Crosscut - This blade is compatible with the TigerSaw 1000 and TigerSaw 2000. It is intended for wood applications where cut quality is the most important consideration. The diameter of this blade is 450mm (17.7"), and it has 132 teeth. $470
TS Saw Blade M BLADE-M 450mm Hollow Extrusion - This blade is compatible with the TigerSaw 1000 and TigerSaw 2000. It is designed for cutting hollow aluminum or non-ferrous extrusions. The diameter of this blade is 450mm (17.7"), and it has 120 teeth. $470
TS Blade PS BLADE-PS 450mm Pack Cutting - This blade is compatible with the TigerSaw 1000 and TigerSaw 2000. It is intended for wood applications where throughput is the most important consideration. The diameter of this blade is 450mm (17.7"), and it has 60 teeth. $470
TS Blade MS BLADE-MS 450mm Solid Extrusion - This blade is compatible with the TigerSaw 1000 and TigerSaw 2000. It is designed for cutting solid aluminum and non-ferrous extrusions. The diameter of this blade is 450mm (17.7"), and it has 60 teeth. $470
BLADE-5 500mm Fine Crosscutting - This blade is compatible with the TigerSaw 1000 (second generation only) and TigerSaw 2000. It is designed for wood applications where cut quality is the most important consideration. The diameter of this blade is 500mm (17.7"), and it has 144 teeth. $470
TS Blade M5 BLADE-M5 500mm Hollow Extrusion - This blade is compatible with the TigerSaw 1000(second generation only) and TigerSaw 2000. It is designed for cutting hollow aluminum extrusions. The diameter of this blade is 500mm (17.7"), and it has 120 teeth. $470
TS Blade PS-5 BLADE-PS5 500mm Pack Cutting -This blade is compatible with the TigerSaw 1000 and TigerSaw 2000. It is intended for wood applications where throughput is the most important consideration. The diameter of this blade is 500mm (17.7"), and it has 60 teeth. $470
TS Saw Blade M BLADE-MS5 500mm Solid Extrusion - This blade is compatible with the TigerSaw 1000 (second generation) and TigerSaw 2000. It is designed for cutting solid aluminum or non-ferrous extrusions. The diameter of this blade is 500mm (17.7"), and it has 60 teeth. $470
Scroll to top