Tigerstop logo

TigerStop is an automated material stop gauge and positioner. It can push, pull, and position material, and will turn your existing machine into a lean manufacturing asset. TigerStop can push up to120 lbs. using roller tables, and quickly positions to your desired length and cuts within +/- .004" (.1mm) every time.

Parts and accessories for TigerSaw, TigerFence, TigerCrossCut, and other products are available.

Call for information or to order - 920-452-4494

TigerStop Spare Parts

If you don't see what you need, give us a call! We carry new and used parts.

Part # Description Weight Price
TigerTurbo Motor Conversion Kit AC-CONV TigerTurbo Motor Conversion Kit (contains parts needed to up TigerTurbo from the older grade a DC motor to the modern AC motor) 20 $3,635
AIK2 Must be integrated by TigerStop, LLC. Includes I/O panel, safety relay box, and cable chain, mounting plate, and foot switch 20 CALL
AIK2-IW Fully Automated Ironworker Kit (safety box, I/O panel, relay kit) must be installed by TigerStop, LLC 35 CALL
TigerStop Amplifier AMP6 Circuit board driving the motor in most TigerStop positioners. Compatible with TigerStop, TigerFence, TigerFence StraightLine Rip, Tiger CrossCut, TigerTurbo, TigerRack, and Heavy Duty 2. Core charge included. 5 $2,070
AMP6-TSS TigerSaw Amplifier with additional port to support the inkjet printing option on a TigerSaw 1000 (first & second generation) or TigerSaw 2000. Serial # required. 5 $2,070
ARB-TSS Fast Arbor Arm Assembly 15 $3,505
TigerTurbo Belt AT5-TT-012 Large Belt for a 12' working length (15' overall length) 6 $1,185
AT5-TT-015 Large Belt for a 15' working length (18' overall length) 8 $1,530
AT5-TT-018 Large Belt for a 18' working length (21' overall length) 9 $1,705
AT5-TT-021 Large Belt for a 21' working length (24' overall length) 11 $1,905
AT5-TT-024 Large Belt for a 24' working length (27' overall length) 12 $2,090
AT5-TT-027 Large Belt for a 27' working length (30' overall length) 14 $2,280
AT5-TT-030 Large Belt for a 30' working length (33' overall length) 15 $2,455
AT5-TT-036 Large Belt for a 36' working length (39' overall length) 18 $2,840
AT5-TT-042 Large Belt for a 42' working length (45' overall length) 21 $3,275
TigerStop Belt ATB03 Belt for 3' working length (5' overall) TigerStop 3 $345
ATB04 Belt for 4' working length (6' overall) TigerStop 3 $420
ATB06 Belt for 6' working length (8' overall) TigerStop 3 $535
ATB08 Belt for 8' working length (10' overall) TigerStop 3 $660
ATB10 Belt for 10' working length (12' overall) TigerStop 3 $800
ATB12 Belt for 12' working length (14' overall) TigerStop 4 $935
ATB14 Belt for 14' working length (16' overall) TigerStop 4 $1,145
ATB16 Belt for 16' working length (18' overall) TigerStop 5 $1,200
ATB20 Belt for 20' working length (22' overall) TigerStop 5 $1,515
ATB22 Belt for 22' working length (24' overall) TigerStop 5 $1,670
ATB24 Belt for 24' working length (26' overall) TigerStop 5 $1,815
ATB26 Belt for 26' working length (28' overall) TigerStop 5 $1,950
ATB28 Belt for 28' working length (30' overall) TigerStop 6 $2,075
ATB30 Belt for 30' working length (32' overall) TigerStop 6 $2,195
TS Belt Clamp ATC32 Belt for 32' working length (34' overall) TigerStop 1 $65
TS Motor End Pulley ATP Motor End Pulley (compatible with TigerStops using 32mm wide belt) 1 $65
TS Belt Clamp Alignment Tool B0700 Belt Clamp Alignment Tool 1 $16
Wired Barcode Scanner Kit BCS Barcode Scanner (requires SET, I/O PANEL) 5 $1,115
BCS-KIT Barcode Scanner Kit with SET, I/O PANEL included 9 $2,000
Wireless Barcode Scanner BCSW Wireless Barcode Scanner (requires SET, I/O PANEL) 5 $1,715
BCSW-KIT Wireless Barcode Scanner includes SET, I/O PANEL 9 $2,500
Tigerstop Back Fence BF Back Fence 6' section, includes hardware 5 $145
TigerSaw Back Fence Throat Plate- Generation 1 BFTP-TSS Throat Plate for back fence on first generation TigerSaw 1000 (2013 and older), not compatible with TigerSaw 1000G2 or TigerSaw 2000. 10 $280
TigerSaw Back Fence Throat Plate- Generation 1 BFTP-TSSG2 Throat Plate for TigerSaw 1000G2 and TIgerSaw 2000 back fence. Not compatible with TigerSaw 1000G1 models (2013 and older). 10 $280
BLADE 450mm fine crosscut blade for wood 13 $470
BLADE-5 500mm fine crosscut blade for wood 13 $470
BLADE-M 450mm Hollow Extrusion Blade for non-ferrous metal 13 $470
BLADEM5 500mm Hollow Extrusion Blade for non-ferrous metal 13 $470
BLADE-MS 450mm Solid Extrusion Blade for non-ferrous metal 13 $470
BLADE-MS5 500mm Solid Extrusion Blade for non-ferrous metal 13 $470
BLADE-PS 450mm pack cutting blade for wood 13 $470
BLADE-PS5 500mm pack Cutting Blade for wood 13 $470
BM16 Measuring Bar 16' working length (power head required) 85 $2,799
TigerSaw Idle Pulley Assembly BP-TSS Replacement Idle Pulley for TigerSaw sytems 1 $355
BR-BM SawGear Mounting Bracket Set 2 $50
BRG Back Rabbet Gauge 2 $1,075
TigerStop Ruler BRLR Back Fence Ruler, left to right reading, attaches to BF, 12' length 1 $80
BRLRM Back Fence Ruler, metric, left to right reading, attaches to BF, 12' length 1 $80
BRRL Back Fence Ruler, right to left reading, attaches to BF, 12' length 1 $80
BRRLM Back Fence Ruler, metric, right to left reading, attaches to BF, 12' length 1 $80
TigerRack Universal Mounting Bracket BR-TSR TigerRack Universal Mounting Bracket 1 $50
TigerStop Controller Cable CC5-10 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6), is 10' long 1 $105
CC5-20 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6), is 20' long 1 $115
CC5-30 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6), is 30' long 1 $125
CC5-40 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6), is 40' long 2 $135
CC5-50 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6), is 50' long 3 $145
CG-TSS Replacment Wood Inserts for the cap guard on older TigerSaws (mfg prior to 2013). One CT-TSS is a full set of wooden inserts (one right and one left) 5 $365
CHIP-BREAK Chip-Breaker for TigerSaw 1000 and TigerSaw 2000 2 $150
TS Standard Controller CON5 Controller interface for most TigerStop positioners, includes keypad and screen. Compatible with TigerStop, TigerFence (and SLR), TigerCrossCut, TigerTurbo, TigerRack, and heavy Duty 2. Requires an Amplifier (AMP5 or AMP6), and is not compatible with older controllers or with Sa Gear stop gauges. Core charge included. 3 $2,070
Version 4 to Version 5 Controller Conversion Kit CON5-CONV Version 4 to Version 5 Controller Conversion Kit (includes version 5 controller (CON%), 10' controller cable (CC 5-10), Power cord (PC), Amplifier (AMP6). Does not include I/O panel or control stand. Requires serial #. Core charge included 9 $3,125
TigerStop Controller Cover CON5CVR Controller Cover - Clear plastic version 5 controller cover 1 $75
TigerStop Keypad Membrane V5 CON5KPM Keypad Membrane compatible with Version 5 (CON5) and cannot be used with older electronics 1 $200
TigerStop Center Pusher CP Center Pusher (adds 21" to the reach of the pusher) 20 $899
TS Roller Replacement CR Replacement Plastic Roller for 14" wide tables 1 $85
CSHP Controller Stand Hardware Pack 1 $30
TigerStop Controller Stand Hardware CSHP Controller Stand Hardware Pack 1 $30
CSS Chop Saw Table Support (2 TABLEG & Hardware - adjustable up to 24" wide by 30" with straight bracket 150 $1,505
CSS-T Tilted Chop Saw Table Support (2 TABLEG & Hardware - adjustable up to 24" wide by 30" with 10° tilted brackets 150 $1,505
DB-RF TigerFence & TigerCrossCut Drive Belt 1 $65
TS Arbor Belt DB-TSS Belt connects saw motor to saw arbor in TigerSaw 1000, TigerSaw 1000G2, or TigerSaw 2000 2 $155
TigerTurbo Motor Drive Belt DB-TT TigerTurbo Motor Drive Belt 1 $50
TS covers DB9CVR Dust covers for cable plugs .5 $6
DNLD TigerLink 6 Cut list downloading software. Includes Ethernet to Serial (ESC) communication hardware 0 $799
DOD-LH TigerSaw's Ink jet Printer uses absorbent ink for porous materials like wood and softwood. Left hard-handed configuration 15 $6,455
DOD-LH-NA TigerSaw's Ink jet Printer uses non-absorbent ink for non-porous materials like plastic and metal. Left hard-handed configuration 15 $6,455
DOD-RH TigerSaw's Ink jet Printer uses absorbent ink for porous materials like wood and softwood. Right hard-handed configuration 15 $6,455
DOD-RH-NA TigerSaw's Ink jet Printer uses non-absorbent ink for non-porous materials like plastic and metal. Right hard-handed configuration 15 $6,455
DS Dust Seal Strip (keeps dust and debris out of the TigerStop beam) per foot 1 $2
Idle End Cap EC2 Idle End Cap 1 $135
TigerStop Encoder ENC Rotary Encoder for TIgerSTop, TIgerFence, and TigerCrossCut (cable connecting encoder to amplifier included) 1 $470
TS Motor Encoder Cable ENCC-B Motor Encoder Cable (connects motor to the Amplifier (AMP6) in a TigerStop, TigerFence, or TigerCrossCut 1 $65
ENCC-SG SawGear Encoder Cable 1 $50
SawGear Encoder ENC-SG SawGear Encoder 1 $470
Tigerstop Ethernet Serial Converter ESC Ethernet to Serial Converter 2 $345
TigerSPC Flat Jaw Set FJ Flat jaw set (included with every TigerSPC) 1 $295
FLOOR-OPT Flooring Optimization software uses the power of Dynamic Optimization to give you the best yield when processing flooring parts. FLOOR-OPT is an upgrade for TABLET-PKG. 0 $2,450
FP04 4' Steel Face Plates for TigerStop, protects aluminum extrusion when cutting marring metal materials 5 $160
FP06 6' Steel Face Plates for TigerStop, protects aluminum extrusion when cutting marring metal materials 20 $200
GRIP-KIT-1 Tube and Pipe Gripper Kit for machines up to 10', includes linear guide kit & cable trough 90 $4,325
GrIP-KIT-2 Tube and Pipe Gripper Kit for machines 10-16', includes linear guide kit & cable trough 165 $5,050
GRIP-KIT-3 Tube and Pipe Gripper Kit for machines 16-22', includes linear guide kit & cable trough 240 $5,775
GRIP-KIT-4 Tube and Pipe Gripper Kit for machines 22-28', includes linear guide kit & cable trough 315 $6,500
GRIP-KIT-5 Tube and Pipe Gripper Kit for machines 28' and up, includes linear guide kit & cable trough 390 $7,225
TigerStop Gangstop Pusher Foot GSX Ganstop (adds 6" - 21" to the rach of the pusher) 10 $695
TigerTurbo Gangstop GSX-TT/HD2 Flat Pusher Attachment for TigerTurbo or the Heavy Duty pushing surface is 2. 12" x 4" 35 $1,040
HD2GB-5:1 Heavy Duty 2 Gear Box 5:1 ratio 20 $3,795
TigerSPC Half Lap Jaw Set HJ Half lap jaw set 1 $295
I/O PANEL Interfaces with peripheral devices including barcode scanners, printers, clamps, and Standard Interconnect Kits (SIK). Can be used with TigerStop, TigerFence, TigerFence StraightLine Rip, Tiger CrossCut, TigerTurbo, TigerRack, and Heavy Duty 2. I/O panels compatible with the Controller (CON 5) and Amplifier (AMP 6), and cannot be used wtih older electronics. Ships with a 10' version 5 controller cable (CC5-10). 4 $999
Idle End Carriage IEC2 Idle End Carriage/Far End Carriage (for TigerStops using a 32mm wide belt, contains idle pulley, pulley housing, and the tensioning bolt) 1 $270
Idle End Pulley IEP Idle End Pulley (for TigerStops using a 32mm wide belt, compatible with Idle End Carriage IEC2) 1 $115
TigerStop Idle End Sensor IES2- Idle End Sensor (enter in the working length after the part number) 1 $145
Idle End Sensor IES-RF TigerFence & Tiger CrossCut Idle End Sensor 1 $90
TigerStop Limit Switch IKLS Standard Interconnect Kit Limit Switch 1 $50
Interconnect Plug IKP Plug used to connect a six-conductor cable with the six-pin I/O port on the Amplifier. Soldering tools and ability will be required. 1 $50
Interconnect Plug IKP8 Plug used to connect a eight-conductor cable with the eight-pin I/O port on the Amplifier. Soldering tools and ability will be required. 1 $50
Solenoid Valve IKSV2 Interconnect Solenoid Valve for SIK 1 $125
TigerStop Internal Carriage ISC Internal Carriage (connects TIgerStop belt inside the beam to the Flip Away outside the beam) 5 $530
TigerTurbo Internal Stop Carriage ISC-TT TigerTurbo Internal Stop Carriage 13 $2,890
TS1000 Light J6730 TigerSaw 1000 and TigerSaw 2000 Light - replacement pilot light .5 $5
TigerStop Locking Handle LH Locking Handle (includes handle, bolt & washer) for various pusher foot accessories 1 $20
SawGear Locking Handle LH-SG Locking Handles for Saw Gear Flip Away 0.5 $20
MB08 Measuring Bar 8' working length (power head required) 45 $1,799
MB12 Measuring Bar 12' working length (power head required) 65 $2,299
MB20 Measuring Bar 20' working length (power head required) 105 $3,399
TigerStop Motor Box Cover MBC2 Replacement aluminum cover for Amplifier (AMP6) 1 $125
Motor Box End Cap & Gasket MBEC2 Replacement End Cap for Amplifier (AMP6) 1 $65
SawGear Measuring Bar Pulley MB-P SawGear Measuring Bar Pulley Assembly 1 $200
TS Motor End Sensor MES2 Motor End Sensor (signals the limit of travel near the motor, compatible with TigerStops of any length) 1 $115
TigerFence TigerCrossCut Motor End Sensor MES-RF TigerFence & TigerCrossCut Motor End Sensor 1 $85
MG Miter Gauge (adds up to 12" to the reach of the pusher) 5 $585
TigerStop Mini Gangstop MGS Mini Gangstop for TigerStop (comes standard with a Mini Gangstop Pusher Foot) 5 $335
Tigerstop Miter Gauge MGX Extended Miter Gauge (adds 13" - 30" to the pusher) 12 $695
MITBLADE-2 TigerSaw Miter 508mm Fine Blade for wood and plastics 13 $470
MITBLADE-M TigerSaw Miter 508mm Fine Blade for non-ferrous metal 13 $470
MITBLADE-MS TigerSaw Miter 508mm Coarse Blade for non-ferrous metal 13 $470
MITBLADE-WPS TigerSaw Miter 508mm Coarse Blade for wood and plastics 13 $470
TigerSPC Miter Jaw Set MJ Miter jaw set 1 $295
TS Motor MOT2 TigerStop Replacement Motor Kit (includes motor mount, motor end pulley, encoder, belt clamp alignment tool) 15 $2,340
MOT-HD2 AC motor for Heavy Duty 2 20 $2,725
TigerFence Motor MOT-TF TigerFence & TigerCrossCut replacement motor kit 15 $1,905
TigerRack Motor MOT-TSR AC motor for TigerRack (incompatible with verison 4 electronics) 9 $2,725
TigerTurbo motor MOT-TT TigerTurbo Motor 20 $2,725
TS Motor Plate Bearing MPB Motor Mount Bearing 1 $30
TS Steel Roller MR Replacement Steel Roller for 14" wide tables 1 $85
MVPK10 Metal Value Pack for 10' overall length machines: 1 long interconnect cable (IOC 6-X), 1 controller cover (CON 5CVR), 1 control cable (CC 5-20). 2 $290
MVPK20 Metal Value Pack for 20' overall length machines: 1 long interconnect cable (IOC 6-X), 1 controller cover (CON 5CVR), 1 control cable (CC 5-30). 2 $385
MVPK30 Metal Value Pack for 30' overall length machines: 1 long interconnect cable (IOC 6-X), 1 controller cover (CON 5CVR), 1 control cable (CC 5-40). 3 $450
MVPK40 Metal Value Pack for 40' overall length machines: 1 long interconnect cable (IOC 6-X), 1 controller cover (CON 5CVR), 1 control cable (CC 5-40). 3 $510
MVPK50 Metal Value Pack for 50' overall length machines: 1 long interconnect cable (IOC 6-X), 1 controller cover (CON 5CVR), 1 control cable (CC 5-50). 3 $570
TigerStop Flip Away Set Screw NSS Plastic Set Screws hold TigerStop Flip Away above the beam. Pack of 10 screws. 1 $10
OPT Dynamic Optimization Software. Nests cuts resulting in high yield 0 $749
PACK-OPT Dynamic Pack Optimization software quickly processes packs and bundles of material for the greatest yield possible 0 $4,925
TigerStop Power Cable PC Power Cable for TigerStop, TigerCrossCut, TigerFence, and Saw Gear Products 1 $50
TigerStop Power Cable 220 V PC-220V 220V for power cable for all TigerSTop products except Saw Gear 1 $50
TS 1000 Printer Cartridge PC-TSS Replacement TigerSaw 1000 Printer Cartridge 1 $115
TS2000 Printer Cartridge PC-TSS-NA Replacement TigerSaw 2000 Printer Cartridge 1 $115
TigerStop Extended Pusher Foot PFX Extended Pusher Foot (adds 7" - 30" to the reach of the pusher) 12 $695
PGK-08 Punch Guide Kit to semi or fully automate a punch. For 8' working length (10' overall) 9 $830
PGK-10 Punch Guide Kit to semi or fully automate a punch. For 10' working length (12' overall) 12 $1,015
PGK-12 Punch Guide Kit to semi or fully automate a punch. For 12' working length (14' overall) 12 $1,115
PGK-16 Punch Guide Kit to semi or fully automate a punch. For 16' working length (18' overall) 14 $1,205
PGK-20 Punch Guide Kit to semi or fully automate a punch. For 20' working length (22' overall) 16 $1,300
PGK-22 Punch Guide Kit to semi or fully automate a punch. For 22' working length (24' overall) 16 $1,390
PGK-24 Punch Guide Kit to semi or fully automate a punch. For 24' working length (26' overall) 19 $1,575
PGK-30 Punch Guide Kit to semi or fully automate a punch. For 30' working length (32' overall) 24 $1,945
TS Polymer Linear Guides PLG Polymer Linear Guides 1 $30
PM Pusher Miter & Fence (available up to 20', specify length) 20 $1,115
PR2 Label Printer 2", stand, hood, I/O PANEL, cabling and software 30 $1,599
TS Printer Labels PR2-LBL 2" Labels for PR2 and PR4, 3 rolls 1 $85
PR4 Label Printer 4", stand, hood, I/O PANEL, cabling and software 30 $1,599
TS Printer Labels PR4-LBL 4" Labels for PR2 and PR4, 3 rolls 1 $85
Thermal Transfer Printer PR4T Thermal Transfer Printer 4", UV resistant labels, stand, hood, I/O PANEL, cabling, and Thermal transfer Printer software 30 $1,998
TS Printer Cable PRCSMT Replacement Printer Data Cable, connects a label printer (or the breakout box on an inkjet printing system) to the I/O Panel 1 $105
PR-DISP Print Display Software (requires PC interface cables and monitor/TV, I/O Panel not included) 0 $699
PRO Enable code for printing when using the TABLET-PKG 0 $250
TigerSPC Receiver RCVD Replacement Receiver for SPC 3 $750
SA7690 Amplifier to I/O Panel Cable Assembly $100
Saw Attachment Plate SAP Saw Attachment Plate used to attach saw to TigerStop tables 3 $150
Tigerstop Spring Buffer SB Spring Buffer (impact absorbing, adds up to 16" to the reach of the pusher) 20 $695
TS Swivel Block Attachment SBA Swivel Block Attachment 8 $1,450
TS Spring Buffer-Left Hand SBHD-L Spring Buffer, Heavy Duty, Left Hand 50 $1,515
TS Spring Buffer-RH SBHD-R Spring Buffer, Heavy Duty, Right Hand 50 $1,515
SBK Safety Box Integration Kit, integrate a kill line to your TigerStop 10 $2,295
SC Serial Extender. For a machine that's motor end away and longer than 18' 2 $345
TigerStop UV Scanning Pusher Foot SCAN-UV TigerStop UV Scanning Pusher Foot for TigerSaw 1000 and TigerSaw 2000 $6,300
SET TigerSet opens communication to TigerStop for PLC's, bar code scanners, and TigerSDK 0 $630
SawGear Crown Molding Foot SG-CMF Crown Molding Foot, adjustable to 3" on spring angle 10 $130
SG-DB Power Head Drive Belt 5 $45
SawGear Flip Away SG-FS SawGear Flip Away 5 $160
SawGear Keypad Membrane SG-KPM SawGear Replacement Keypad Membrane 1 $155
SG-MOT SawGear Replacement Motor 5 $495
SawGear Power Head SG-PH SawGear Power Head with Power Cord 20 $1,955
SawGear Stop Bar SG-SB SawGear Stop Bar (comes standard with every SawGear order, may be upgraded to Crown Molding Foot) 5 $75
SG-SC SawGear Carriage Assembly (connects the SawGear belt inside the beam to the flip away) 5 $200
SGTAB08 (1) Portable Table for SG08, (1) supprt leg, includes brackets 8' working length (10' length overall) 61 $675
SGTAB12 (1) Portable Table for SG012, (1) supprt leg, includes brackets 12' working length (14' length overall) 75 $750
SGTAB16 (1) Portable Table for SG16, (2) supprt legs, includes brackets 16' working length (18' length overall) 110 $875
SGTAB20 (1) Portable Table for SG20, (2) supprt legs, includes brackets 20' working length (22' length overall) 130 $1,015
SawGear Table leg SG-TFLG Extra Leg for SawGear portable tables 18 $340
TS Standard Interconnect Kit SIK Semi-automatic Tool Interconnect Kit (included with every new machine) 5 $499
SIK-IW Semi-automatic Ironworker Kit (relay kit) 5 $499
SMTCC-20 Version 4 Controller Cable, 20' long 1 $245
TigerStop Controller Stand SMTCS Controller Stand includes mounting hardware and is used for both the Standard Controller and the Tablet Package. Compatible with TigerStop, TigerFence, Tiger CrossCut, TigerRack, TigerTurbo, and Heavy Duty 2. 5 $230
TigerStop Controller Cover SMTCVR Clear plastic controller cover for versions 3.0 -4.7 1 $95
TigerStop V4 Keypad Membrane SMTKPM Keypad Membrane compatible with Versions 3.0 - 4.7 and is incompatible with Version 5 (CON5) controller 1 $300
SOFTUP Software reprogramming to current version if feasible, serial # required 0 $305
SPC-TABLET Tablet PC package with SPC software 12 $3,099
TS 1000 Soft Start SS-TSS TigerSaw 1000 Soft Start 460V/480V 2 $1,560
STOP2 FlipAway 10 $435
STOP-TT TigerTurbo Carriage 10 $855
TS Power Switch SW2 Replacement Power Switch for the Amplifier 1 $40
TS Table Brackets TABBR Feed Table Bracket with leg binders 15 $200
Tilted Table Brackets TABBR-T Tilted Feed Table Bracket with leg binders 15 $200
TS Table hardware Pack TABHP Feed Table Hardware Pack (one per table section) 1 $30
TABLEG Standard 14" wide table leg set. Adjustable height of 35" - 45" 55 $535
TABLEG-24 24" wide table leg set, adjustable height 35" - 45" 65 $535
TABLEG-31 31" wide table leg set, adjustable height 35" - 45" 70 $535
TABLEG-MINI 14" wide table leg set, adjustable height 29.8" - 39.8" 50 $500
TigerTouch Tablet TABLET Replacement TigerTouch Tablet PCs come with pre-loaded TigerLink6 Cut List Downloading software (DNLD), TigerSet (SET) to control peripheral devices, and Dynamic Optimization Software (OPT). 12 $2,075
TigerTouch Tablet Package TABLET-PKG TigerTouch Tablet Package, includes DNLD, OPT, and TigerTouch software 12 $3,695
TABP Side Table for Table Saws 90 $965
TB Tilt Base set, used to tilt machine tools 10° (some machines excluded) up to 18" upcut saw 50 $535
TG-CC Cable Chain  Trough 50 $625
TG-CC6 Cable Chain & Trough Extension 6' increments 50 $275
TG-GR Tube & Pipe Gripper 45 $2,400
TG-LG Linear Guide Kit for TS08 25 $1,300
TG-LG6 Linear Guide Kit Extension 6' increment 25 $450
TIGERSDK TigerSKD is a FREE software development kit on GitHub - use with TigerSet 0 FREE
TS T-Nut TN T-Nut, 5/16" - 18 1 $2
TS T-Nut Metric TN-MM M 8 T-Nut, metric 1 $2
TigerSaw Throat Plate- Gen 1 TP-TSS Throat Plate for TigerSaw 1000 table top. Not compatible with TigerSaw 1000G2 models (after 2013) or TigerSaw 2000. 10 $355
TR-AF (L or R) TigerRack Auto Flip Carriage, pneumatic Flip Away, choose Left or Right 25 $3,599
TR-B1 TigerRack Brake (inlcudes I/O Panel 144lb load) 10 $2,235
TR-B2 TigerRack Brake Set 2 (includes I/O Panel 288lb load) 20 $3,595
TR-B3 TigerRack Brake Set 3 (ncludes I/O Panel 432lb load) 30 $4,795
TR-DB TigerRack Motor Drive Belt 1 $50
TS-CLAMP Pneumatic Double Clamps (need AIK2 to operate) 27 $1,925
TS-CLAMP-KIT Pneumatic Double Clamps & AIK 2 (AIK 2 must be installed by TigetStop) 55 $5,520
TigerStop Hardware Pack TSHP Hardware pack is used for mounting a TigerStop to a table. Contains t-bolts, t-nuts, hex head nuts, and washers (8 of each) 1 $40
UBR Universal Brackets, 1 per every 3' of TigerStop. Larger machines need 1 per every 24" 1 $50
USBA USB to Serial Converter 1 $250
U Slot USL Trim for t-slots on TigerStop extrusions 1 $2
UV Crayons UVC UV Crayons for Crayon Defect Marking, box of 50 1 $135
VFD-230 TigerSaw 2000, Variable Frequency Drive for TigerSaw Systems (208V/230V, 3Ph, 10HP) 12 $2,499
VFD-460 TigerSaw 2000, Variable Frequency Drive for TigerSaw Systems (480V, 3Ph, 10HP) 12 $2,499
Scroll to top