John G. Weber Co., Inc.
920.452.4494
  10" Industrial Cabinet Saw specs

Overall saw dimensions: 44" w x 34" d x 34" h

69 1/4" w x 36 1/2" d x 34" h (w/ optional fence & 36" rails)

85 1/4" w x 36 1/2" d x 34" h (w/ optional fence & 52" rails)

Motor: (all 50-60Hz, TEFC):

 

 

ICS31230: 3 hp, 1 ph, 230 V, 13 A $3,899

ICS51320: 5 hp, 1 ph, 230 V, 20.5 A (optional)  $4,299

ICS53230: 5 hp, 3 ph, 230 V, 13 A (optional)

ICS53480: 5 hp, 3 ph, 480 V, 6.5 A (optional)

ICS73230: 7.5 hp, 3 ph, 230 V, 17.8 A (optional) $4,799

ICS73480: 7.5 hp, 3 ph, 480 V, 9 A (optional)

Cabinet footprint: 20" w x 25" d
Cast iron table: 24" w x 30" d, 44" w x 30" d (w/ extension wings)
Extension wing: 10" w x 30" d
Extension table (optional): 24" w x 30" d (36" rails), 40" w x 30" d (52" rails)
Weights (may vary with motor): 530 lbs (table saw only)

635 lbs (with optional fence, 36" rails & table)

685 lbs (with optional fence, 52" rails & table)
Shipping weight (approx.): 640 lbs (table saw only)
Blade: 60-tooth, professional grade, 5/8" arbor
Blade diameter: 10"
Blade tilt: Left
Blade kerf: 3mm
Blade plate thickness: 2mm
Max. depth of cut, blade at 0º: 3 1/8"
Max. depth of cut, blade at 45º: 2 1/4"
Max. rip, right of blade: 52 1/2" (with optional 52" rails)

36 1/2" (with optional 36" rails)
Max. rip, left of blade: 12 1/2"
Dado diameter: 8" (requires a separate brake cartridge)
Dado max. width: 13/16"
Arbor diameter at blade: 5/8"
Main bearing size: 62mm OD x 30mm ID
Second bearing size: 52mm OD x 25mm ID
Table in front of blade (max. elevation): 11"
Table behind blade (max. elevation): 9 3/4"
Arbor Runout: 0.001" Maximum allowable runout
Blade lateral movement over full elevation range: 0.006" Maximum
Table flatness measured diagonally: 0.010" Maximum gap
Overall table and extension wing flatness: 0.025" Maximum gap
Blade alignment with miter slot: 0.010" Maximum displacement
Deviation of miter gauge indexing stops from actual: ±0.25º
Alignment between splitter and blade: 0.010" Maximum difference
Miter slots: T-shaped, 3/4" at top, 1" at bottom, 3/8" deep

11 1/8" center-to-center

5 1/2" (arbor flange to center of right slot)
Dust collection port diameter: 4"
Riving knife / splitter thickness: 2mm
Blade guard: polycarbonate, extends only 5/8" to right of blade
Insert: zero clearance, phenolic core, melamine surfaces
Hand wheels: 8" diameter, cast iron with chrome handle
Belts: 2 V-ribbed belts

   Return to Previous Page